Difference between revisions of "FAQ:Self-service portal not responding to login/authentication"

From support-works
Jump to navigation Jump to search
(Created page with "{{Template:Basic Cover | title=Self-service portal not responding to login/authentication | type=FAQ }} {{Template:Basic Status | status=Published | version=1.0 | authors=Hor...")
 
Line 13: Line 13:
 
If you have reports of the Self Service not responding when you enter a username and password, there could be a number of issues. One of the issues is that if you check the swserver log and see error 81
 
If you have reports of the Self Service not responding when you enter a username and password, there could be a number of issues. One of the issues is that if you check the swserver log and see error 81
  
 +
<pre>
 
'unable to reach the LDAP server error 81'
 
'unable to reach the LDAP server error 81'
 
+
</pre>
  
 
The first thing to do is the ping the server to see if it is reachable using the command prompt on the Supportworks server
 
The first thing to do is the ping the server to see if it is reachable using the command prompt on the Supportworks server
  
 +
<pre>
 
ping <LDAP SERVER IP>
 
ping <LDAP SERVER IP>
 +
</pre>
  
 
If there is no response then the LDAP server needs to be checked or if there is an alternative LDAP server you can use, update the password in the customer record. Begin with one password and ask the customer to login using self service, if that works then update the other passwords. If for example the password is  
 
If there is no response then the LDAP server needs to be checked or if there is an alternative LDAP server you can use, update the password in the customer record. Begin with one password and ask the customer to login using self service, if that works then update the other passwords. If for example the password is  
  
 +
<pre>
 
UPDATE Userdb
 
UPDATE Userdb
 
SET Password = replace(password, 'OLD SERVER','NEW SERVER')  
 
SET Password = replace(password, 'OLD SERVER','NEW SERVER')  
 
WHERE keysearch = 'customerID';
 
WHERE keysearch = 'customerID';
 +
</pre>

Revision as of 11:02, 25 June 2018



Status: Published
Version: 1.0
Authors: Hornbill Support
Applies to: all ITSMs

If you have reports of the Self Service not responding when you enter a username and password, there could be a number of issues. One of the issues is that if you check the swserver log and see error 81

'unable to reach the LDAP server error 81'

The first thing to do is the ping the server to see if it is reachable using the command prompt on the Supportworks server

ping <LDAP SERVER IP>

If there is no response then the LDAP server needs to be checked or if there is an alternative LDAP server you can use, update the password in the customer record. Begin with one password and ask the customer to login using self service, if that works then update the other passwords. If for example the password is

UPDATE Userdb
SET Password = replace(password, 'OLD SERVER','NEW SERVER') 
WHERE keysearch = 'customerID';